Products and Services

Akim provides a wide variety of products and services of quality chemical specialties to the needs of our customers. Among the products and services we offer you are:

Ask for the following courses:

  • Phosphatization.

  • Introduction to water treatment.

  • Industrial blued.

  • Good Manufacturing Practices (GMP) in the food industry.

We have the following analysis for your processes:

  • Corrosion in Saline Chamber, according to ASTM Standard B 117.

  • Test for Passivation in Salina Chamber, with ASTM A967.

Services
  • Full Service

  • Outsourcing

  • Chemical Manegement

Products 

ANTIOXIDANTS FOR METALS (CHECK)

 

To protect metal parts stored indoors or outdoors. Oil based or water based, providing corrosion protection.

 

BACTERICIDES, FUNGICIDES AND SANITIZERS (CIDE)

 

Disinfectants, sanitizers, cleaners and deodorants for surfaces and equipment with food contact and bactericides to control biological growth cleaners.

 

CLEANERS: ALKALINE AND ACIDIC (CLEAN)

 

To ferrous and nonferrous metals for dipping, spraying or electrolytic, preparing surfaces for painting, electroplating or phosphating and providing corrosion protection.

 

CHROMATIZATION OF ALUMINIUM AND GALVANIZED AND POWDER COATING OF STEEL PARTS (COAT)

 

For surfaces of aluminium and galvanized steel as the basis for painting passivated galvanized rolled galvalume.

 

CUTTING OIL SOLUBLE (COOL)

 

For metalworking processes, punching and formed with corrosion protection. Mineral oils, emulsifiable soluble, semi-synthetic fluids. Biodegradable products.

 

DEFOAMING (DEFOAM)

 

Products for inhibiting foaming in detergent cleaners, cutting solutions etc. Organic or silicone based.

 

DRAW

 

Liquid compounds, oils, lubricants, soap and pasta, dielectrics for stamping, metal inlay and EDM.

 

ETCH

 

Alkaline liquids for accurate aluminium etching.

 

FLOC

 

Flocculants based in anionic, cationic, organic solvents, liquids or powders for clarification of effluent

 

INHIBITOR

 

Inhibitors for antifreeze solutions, for sulphuric acid, phosphoric acid, organic acid, for hydrochloric acid etc. Oxidation inhibitors for ferrous metals.

 

LUBRICANTS FOR PUNCHING, METAL INLAY AND STAMPING (LUBE)

 

Lubricants for tube forming and drawing of wire and metal bars of iron.

Paste, gelatine and liquid to die of iron, steel, stainless steel, aluminium, copper, tin, iron-silicon sheet.

 

DOXIDIZERS FOR ACID METAL (Novox)

 

Products for pickling process prior to painting metals.

 

END SEALS (SEAL)

 

Final rinses prior to painting processes phosphate.

Stamps no chromic, chromic and organic.

 

SOLVENTS DIELECTRICS (SOLV)

 

Solvents for use in electrical equipment such as engine cleaning, boards, and other places where water cannot be used.

 

PAINT REMOVER (STRIP / REMOV)

 

Paint removers without solvents, acidic or alkaline; for use at room temperature or temperature.

Protectors Cab:

Solvent and aqueous bases products to form protective films applied on the walls of spray booths.

 

WATER TREATMENT / TOWERSS / BOILERS / EFFLUENTS (TREAT)

 

Cooling towers.- corrosion and scale inhibitors, dispersants and levelling of pH.

Algaecide.- To control algae.

Boilers.- Treatment (chemical package) Corrosion and scale inhibitors, neutralizing amines and filmic sequestering oxygen.

Effluents.- Levellers pH, flocculants etc.

 

© 2014 Akim de México S.A. de C.V. 

Dirección

Oriente 171 No. 440 Col. Aragón Inguarán 07820 México, D.F.

 

 Tel: (+55) 5760-5500,  5751-0055, 5551-2565, 5751-0069  

ventas@akim.mx